GIMP for Mac

What's new in this version:

New Splash Screen:
- Dr. Mark McCaughrean has graciously created a third splash screen for this release (see image at the top) based on his processed photograph of the “Dragon Jet” HH288 protostellar outflow system.
- We are deeply grateful to Dr. McCaughrean for the three splash screens he has created for the 3.2 release candidates. It will be tough decision to select the one to use for the final GIMP 3.2!

Non-Raster Layers:
- GIMP 3.2 has three kinds of “non-raster” layers - the new link and vector layers in addition to the existing text layers. A lot of behind-the-scenes work has been done by Jehan to standardize how all of these layer types handle “destructive” actions, such as painting and merging down layer masks. You should now be better protected from accidentally altering these layers destructively, unless you intentionally rasterize them (and if you change your mind, you can easily revert that process to restore the original layer).
- As a result of this work, we also have a small new feature. Previously, you could drag and drop a color swatch on a text layer to change its color. Alx Sa extended this behavior to vector layers - now you can drag either a color or pattern swatch to change its fill!

Color Operations:
- As part of Jehan‘s continued work to improve GIMP’s color correctness, the Levels, Curves, Equalize, and White Balance filters now default to Linear precision while allowing for other color precision modes to be set. This fixes several inconsistencies in how these filters operate in both the GUI and via scripting.

UX / UI Improvements:
- We’ve refined the logic of when the Welcome Dialog appears on start. If you intentionally open GIMP with an image (either by dragging and dropping it or opening via the command line), the Welcome Dialog will no long appear in front of the image. The only exception is the first time you open GIMP after an update, so you can see what has changed.
- Alx Sa reordered the Hue Saturation GUI so that the Lightness slider is placed below the Saturation slider. While this is a small fix, it standardizes the order with all other places in GIMP where we have HSL settings.
- The Flip tool can now be controlled with arrow keys, similar to the Move and Rotate transformation tools. When the Flip tool is selected, you can use the Left and Right arrows to flip the image horizontally, and the Up and Down arrows to flip it vertically.
- The Shear tool can also now be adjusted with the arrow keys. Use the Left and Right arrows to shear your image horizontally, and the Up and Down arrows to do the same vertically.
- Like the Move tool, you can hold down Shift to shear with a larger value.
- The GIMP_ICON_TEXTURE pattern has been removed from the background of the Navigation and Selection dockables. This should remove a source of visual irration from those dockables in dark mode.
- The Delete button in the Layer dockable will now delete only the layer mask if it is selected, instead of always deleting the layer
- Jehan has refined the logic for color selection so that it is not impacted by the image when that wouldn’t make sense in context. For instance, you can now use the full color palette to set Grid colors, even if you’re working on an indexed image with a limited palette.
- The Crop Tool now automatically adds transparency to a layer if you set it to fill with transparency and make a crop that’s larger than the current layer. Thanks to Michael Schumacher for the initial UX report!
- Jacob Boerema adjusted our GUI code to prevent overly wide dialogs in places like the image export comment field and the Image Map guide pop-up
- Denis Rangelov added initial support for using the Global Menu on flatpak. You’ll need to set the GIMP_GTK_MENUBAR variable inside the Flatpak environment (as noted here) to use it for now.

File Formats:
DDS:
- The DDS plug-in now supports exporting in BC7 format, as a complement to the BC7 import support added in GIMP 3.0. We use the bc7enc_rdo library developed by Rich Geldreich for the conversion.
- JPEG2000:
- We fixed a bug in the JPEG 2000 export process which was causing the quality setting to be lower than what OpenJPEG allowed. This fix gives you more fine-grain control of the image export quality.
- OpenEXR:
- New contributor Waris Maqbool improved our support for importing Luminance/Chroma OpenEXR images. Previously we only imported the grayscale luminance channel, but thanks to their efforts we now also support the YR and YB color channels.

Procreate Swatches:
- You can now import palette swatches from the Procreate art program. This support was added by our resident file format fan Alx Sa after seeing a teammate use it during the Global Game Jam and finding that they couldn’t open the palette in GIMP!

Swatchbooker Palettes:
- We improved our existing support for this palette format by adding any attached color profiles to the imported palettes

XMC:
- Longtime contributor Michael Schumacher has made several improvements to our XMC plug-in. In addition to updating several aspects and fixing warnings, he has also added protections to prevent it from modifying layer names in the original project when exporting as XMC.

WebP:
- We improved the code for Lossless WebP export to ensure that some of the “lossy” settings defined in the GUI didn’t impact the lossless image quality

Bug Fixes and Improvements:
- Anders Jonsson has corrected the default color in the Fog filter for linear color conversion.
- Bruno Lopes fixed a regression in our Camera RAW plug-ins that caused them to not work on macOS.
- Sample Point modes are now correctly copied over when duplicating an image.
- programmer_ced improved our flatpak build to use HOST_XDG_CONFIG_HOME for its configuration location. This should make it more intuitive for flatpak users to find where to put third-party plug-ins and where to retrieve various settings.
- Alx Sa upgraded the Histogram Editor. It can now handle pixel counts for much larger images - in theory, up to both widths and heights of 4 billion!
- Jacob Boerema fixed a bug on Windows where Gradient Flare presets wouldn’t be loaded
- The Round Corners filter now uses your current background color for the fill, instead of always using the default color
- Anders Jonsson diagnosed and fixed an issue with the alignment of our transform anchor points GUI in the System theme
- We made a number of fixes to non-destructive filters, especially related to the scaling and cropping of Render style filters. New contributor balooii fixed a bug that could occur when undoing filters applied to individual channels.
- Jehan corrected a bug where the pressure curve did not show in the input device manager on certain platforms
- New contributor Kaushik B fixed a bug that caused warnings in plug-ins when creating number input buttons with small min and max ranges

Fancier .dmg and Windows installer; and sturdier .appimage:
- Noticeable improvements have been made to our macOS package. In short, Bruno Lopes designed a custom icon for the mounted .dmg on the desktop. He also scripted the generation of custom .dmg background matching the splash screen for each release.
- Similar scripts were made for the Windows installer which will also feature part of the splash image, automatically extracted at build time.
- Also, some important fixes have been made by Bruno to our AppImage package. It should work again on AArch64 (it stopped working after our move to Debian 13), and support for third-party plugins (built for Debian 13) is hopefully fixed.

API:
- Thanks to work by Alx and Jehan, the Curve-Bend plug-in can now be used in scripts via its individual parameters as listed in the Procedure Browser. Previously, you needed to use a generic settings-data which combined several parameters in a single string. Both methods will work until GIMP 4, at which point we’ll retire the settings-data parameter.
- The GimpColorScales and GimpColorSelect widgets are now introspectable, which means you can use their public functions in your plug-ins and scripts.
- We’ve added gimp_config_get_xcf_version () and gimp_config_set_xcf_version () functions. These can be used when saving XCFs to target a specific version. Currently, we use this feature in GIMP to decide whether to save colors as the older GimpRGB format or the new colorspace-aware GeglColor.
- Ondrej Míchal has improved the logic for setting bounds for integer-type GimpSpinScales.
- As we continue to expand the GimpDrawableFilter API, we’ve marked a number of gimp_drawable_* () functions as deprecated. They will stay available until GIMP 4, but we recommend moving your filter code to use the GEGL filters directly instead of the older, dedicated wrapper functions.
- You can now create GimpCurve objects in plug-ins. This allows you to add gimp:curves filters to layers and layer groups. As a result, we’ve deprecated gimp_drawable_curves_explicit () and gimp_drawable_curves_spline () since they can be replaced with the Curve filter directly. This work was done by Jehan and Alx Sa.
- Here is an example of applying an inverted gimp:curves as non-destructive filter, on the blue channel in non-linear space, through the Python binding:
- c = Gimp.Curve.new()
- c.set_curve_type(Gimp.CurveType.FREE)
- x = 0
- while x <= 1.0:
- c.set_sample(x, 1.0 - x)
- x += 1 / c.get_n_samples()
- filter = Gimp.DrawableFilter.new(layer, "gimp:curves", "")
- config = filter.get_config()
- config.set_property("curve", c)
- config.set_property("channel", Gimp.HistogramChannel.BLUE)
- config.set_property("trc", Gimp.TRCType.NON_LINEAR)
- layer.append_filter(filter)

Security:
- This release also contains fixes for possible exploits in some of our file loading plug-ins. We appreciate security reports from the Zero Day Initiative and individuals such as JungWoo Park and wooseokdotkim, and the work of developers like Jacob Boerema to patch them. The fixes include those for:
- ZDI-CAN-28232
- ZDI-CAN-28599
- ZDI-CAN-28265
- ZDI-CAN-28530
- Around GIMP:

Website:
- If you ever encountered a 404 Missing Page error on our website, you would have noticed our cute Wilber animation! This was work by the animation film director Aryeom, created as a hand-made SVG+SMIL animation by Aryeom and Jehan back in 2016.
- As our logo design was updated in GIMP 3 (which by the way is also work by Aryeom, with feedback by the whole team), a refresh to this animated SVG, using the new Wilber, has been initiated by Bruno Lopes. Additional refinements were made by Aryeom Han and Jehan.
- Since we hope you won’t normally see this page (and if you do, please report the broken link), here’s what it looks like (if you missed it, force-refreshing the page should work, or just go to any non-existing page to see the animation in proper context)

Translations:
- We have a new Cornish translation of GIMP, provided by Flynn!

Google Summer of code:
- We are once again participating in the Google Summer of Code. This is an opportunity for potential new contributors (of any age!) to work with us to develop a new feature for GIMP. We have a list of suitable projects, but you are welcome to propose your own idea. Please reach out early so we can get to know you beforehand!