-
Latest Version
-
Operating System
Mac OS X
-
User Rating
Click to vote -
Author / Product
-
Filename
postgresql-9.4.2-1-osx.dmg
-
MD5 Checksum
3ab5c15c8f5e6c85fcfbc928f9099dc7
Sometimes latest versions of the software can cause issues when installed on older devices or devices running an older version of the operating system.
Software makers usually fix these issues but it can take them some time. What you can do in the meantime is to download and install an older version of PostgreSQL 9.4.2.
For those interested in downloading the most recent release of PostgreSQL for Mac or reading our review, simply click here.
All old versions distributed on our website are completely virus-free and available for download at no cost.
We would love to hear from you
If you have any questions or ideas that you want to share with us - head over to our Contact page and let us know. We value your feedback!
What's new in this version:
Migration to Version 9.4.2:
- A dump/restore is not required for those running 9.4.X.
- However, if you use contrib/citext's regexp_matches() functions, see the changelog entry below about that.
- Also, if you are upgrading from a version earlier than 9.4.1, see Section E.2. Changes:
- Avoid possible crash when client disconnects just before the authentication timeout expires
- If the timeout interrupt fired partway through the session shutdown sequence, SSL-related state would be freed twice, typically causing a crash and hence denial of service to other sessions. Experimentation shows that an unauthenticated remote attacker could trigger the bug somewhat consistently, hence treat as security issue.
- Improve detection of system-call failures
- Our replacement implementation of snprintf() failed to check for errors reported by the underlying system library calls; the main case that might be missed is out-of-memory situations. In the worst case this might lead to information exposure, due to our code assuming that a buffer had been overwritten when it hadn't been. Also, there were a few places in which security-relevant calls of other system library functions did not check for failure.
- It remains possible that some calls of the *printf() family of functions are vulnerable to information disclosure if an out-of-memory error occurs at just the wrong time. We judge the risk to not be large, but will continue analysis in this area.
- In contrib/pgcrypto, uniformly report decryption failures as "Wrong key or corrupt data"
- Previously, some cases of decryption with an incorrect key could report other error message texts. It has been shown that such variance in error reports can aid attackers in recovering keys from other systems. While it's unknown whether pgcrypto's specific behaviors are likewise exploitable, it seems better to avoid the risk by using a one-size-fits-all message.
- Protect against wraparound of multixact member IDs
- Under certain usage patterns, the existing defenses against this might be insufficient, allowing pg_multixact/members files to be removed too early, resulting in data loss. The fix for this includes modifying the server to fail transactions that would result in overwriting old multixact member ID data, and improving autovacuum to ensure it will act proactively to prevent multixact member ID wraparound, as it does for transaction ID wraparound.
- Fix incorrect declaration of contrib/citext's regexp_matches() functions
- These functions should return setof text[], like the core functions they are wrappers for; but they were incorrectly declared as returning just text[]. This mistake had two results: first, if there was no match you got a scalar null result, whereas what you should get is an empty set (zero rows). Second, the g flag was effectively ignored, since you would get only one result array even if there were multiple matches.
- While the latter behavior is clearly a bug, there might be applications depending on the former behavior; therefore the function declarations will not be changed by default until PostgreSQL 9.5. In pre-9.5 branches, the old behavior exists in version 1.0 of the citext extension, while we have provided corrected declarations in version 1.1 (which is not installed by default). To adopt the fix in pre-9.5 branches, execute ALTER EXTENSION citext UPDATE TO '1.1' in each database in which citext is installed. (You can also "update" back to 1.0 if you need to undo that.) Be aware that either update direction will require dropping and recreating any views or rules that use citext's regexp_matches() functions.
- Render infinite dates and timestamps as infinity when converting to json, rather than throwing an error
- Fix json/jsonb's populate_record() and to_record() functions to handle empty input properly
- Fix incorrect checking of deferred exclusion constraints after a HOT update
- If a new row that potentially violates a deferred exclusion constraint is HOT-updated (that is, no indexed columns change and the row can be stored back onto the same table page) later in the same transaction, the exclusion constraint would be reported as violated when the check finally occurred, even if the row(s) the new row originally conflicted with had been deleted.
- Fix behavior when changing foreign key constraint deferrability status with ALTER TABLE ... ALTER CONSTRAINT
- Operations later in the same session or concurrent sessions might not honor the status change promptly.
- Fix planning of star-schema-style queries
- Sometimes, efficient scanning of a large table requires that index parameters be provided from more than one other table (commonly, dimension tables whose keys are needed to index a large fact table). The planner should be able to find such plans, but an overly restrictive search heuristic prevented it.
- Prevent improper reordering of antijoins (NOT EXISTS joins) versus other outer joins
- This oversight in the planner has been observed to cause "could not find RelOptInfo for given relids" errors, but it seems possible that sometimes an incorrect query plan might get past that consistency check and result in silently-wrong query output.
- Fix incorrect matching of subexpressions in outer-join plan nodes
- Previously, if textually identical non-strict subexpressions were used both above and below an outer join, the planner might try to re-use the value computed below the join, which would be incorrect because the executor would force the value to NULL in case of an unmatched outer row.
- Fix GEQO planner to cope with failure of its join order heuristic (Tom Lane)
- This oversight has been seen to lead to "failed to join all relations together" errors in queries involving LATERAL, and that might happen in other cases as well.
- Ensure that row locking occurs properly when the target of an UPDATE or DELETE is a security-barrier view
- Use a file opened for read/write when syncing replication slot data during database startup
- On some platforms, the previous coding could result in errors like "could not fsync file "pg_replslot/...": Bad file descriptor".
- Fix possible deadlock at startup when max_prepared_transactions is too small
- Don't archive useless preallocated WAL files after a timeline switch
- Recursively fsync() the data directory after a crash
- This ensures consistency if another crash occurs shortly later. (The second crash would have to be a system-level crash, not just a database crash, for there to be a problem.)
- Fix autovacuum launcher's possible failure to shut down, if an error occurs after it receives SIGTERM
- Fix failure to handle invalidation messages for system catalogs early in session startup
- This oversight could result in failures in sessions that start concurrently with a VACUUM FULL on a system catalog.
- Fix crash in BackendIdGetTransactionIds() when trying to get status for a backend process that just exited
- Cope with unexpected signals in LockBufferForCleanup()
- This oversight could result in spurious errors about "multiple backends attempting to wait for pincount 1".
- Fix crash when doing COPY IN to a table with check constraints that contain whole-row references
- The known failure case only crashes in 9.4 and up, but there is very similar code in 9.3 and 9.2, so back-patch those branches as well.
- Avoid waiting for WAL flush or synchronous replication during commit of a transaction that was read-only so far as the user is concerned
- Previously, a delay could occur at commit in transactions that had written WAL due to HOT page pruning, leading to undesirable effects such as sessions getting stuck at startup if all synchronous replicas are down. Sessions have also been observed to get stuck in catchup interrupt processing when using synchronous replication; this will fix that problem as well.
- Avoid busy-waiting with short recovery_min_apply_delay values
- Fix crash when manipulating hash indexes on temporary tables
- Fix possible failure during hash index bucket split, if other processes are modifying the index concurrently
- Fix memory leaks in GIN index vacuum
- Check for interrupts while analyzing index expressions
- ANALYZE executes index expressions many times; if there are slow functions in such an expression, it's desirable to be able to cancel the ANALYZE before that loop finishes.
- Ensure tableoid of a foreign table is reported correctly when a READ COMMITTED recheck occurs after locking rows in SELECT FOR UPDATE, UPDATE, or DELETE
- Add the name of the target server to object description strings for foreign-server user mappings
- Include the schema name in object identity strings for conversions
- Recommend setting include_realm to 1 when using Kerberos/GSSAPI/SSPI authentication
- Without this, identically-named users from different realms cannot be distinguished. For the moment this is only a documentation change, but it will become the default setting in PostgreSQL 9.5.
- Remove code for matching IPv4 pg_hba.conf entries to IPv4-in-IPv6 addresses
- This hack was added in 2003 in response to a report that some Linux kernels of the time would report IPv4 connections as having IPv4-in-IPv6 addresses. However, the logic was accidentally broken in 9.0. The lack of any field complaints since then shows that it's not needed anymore. Now we have reports that the broken code causes crashes on some systems, so let's just remove it rather than fix it. (Had we chosen to fix it, that would make for a subtle and potentially security-sensitive change in the effective meaning of IPv4 pg_hba.conf entries, which does not seem like a good thing to do in minor releases.)
- Fix status reporting for terminated background workers that were never actually started
- After a database crash, don't restart background workers that are marked BGW_NEVER_RESTART
- Report WAL flush, not insert, position in IDENTIFY_SYSTEM replication command
- This avoids a possible startup failure in pg_receivexlog.
- While shutting down service on Windows, periodically send status updates to the Service Control Manager to prevent it from killing the service too soon; and ensure that pg_ctl will wait for shutdown
- Reduce risk of network deadlock when using libpq's non-blocking mode
- When sending large volumes of data, it's important to drain the input buffer every so often, in case the server has sent enough response data to cause it to block on output. (A typical scenario is that the server is sending a stream of NOTICE messages during COPY FROM STDIN.) This worked properly in the normal blocking mode, but not so much in non-blocking mode. We've modified libpq to opportunistically drain input when it can, but a full defense against this problem requires application cooperation: the application should watch for socket read-ready as well as write-ready conditions, and be sure to call PQconsumeInput() upon read-ready.
- In libpq, fix misparsing of empty values in URI connection strings
- Fix array handling in ecpg
- Fix psql to sanely handle URIs and conninfo strings as the first parameter to \connect
- This syntax has been accepted (but undocumented) for a long time, but previously some parameters might be taken from the old connection instead of the given string, which was agreed to be undesirable.
- Suppress incorrect complaints from psql on some platforms that it failed to write ~/.psql_history at exit
- This misbehavior was caused by a workaround for a bug in very old (pre-2006) versions of libedit. We fixed it by removing the workaround, which will cause a similar failure to appear for anyone still using such versions of libedit. Recommendation: upgrade that library, or use libreadline.
- Fix pg_dump's rule for deciding which casts are system-provided casts that should not be dumped
- In pg_dump, fix failure to honor -Z compression level option together with -Fd
- Make pg_dump consider foreign key relationships between extension configuration tables while choosing dump order
- This oversight could result in producing dumps that fail to reload because foreign key constraints are transiently violated.
- Avoid possible pg_dump failure when concurrent sessions are creating and dropping temporary functions
- Fix dumping of views that are just VALUES(...) but have column aliases
- Ensure that a view's replication identity is correctly set to nothing during dump/restore
- Previously, if the view was involved in a circular dependency, it might wind up with an incorrect replication identity property.
- In pg_upgrade, force timeline 1 in the new cluster
- This change prevents upgrade failures caused by bogus complaints about missing WAL history files.
- In pg_upgrade, check for improperly non-connectable databases before proceeding
- In pg_upgrade, quote directory paths properly in the generated delete_old_cluster script
- In pg_upgrade, preserve database-level freezing info properly
- This oversight could cause missing-clog-file errors for tables within the postgres and template1 databases.
- Run pg_upgrade and pg_resetxlog with restricted privileges on Windows, so that they don't fail when run by an administrator
- Improve handling of readdir() failures when scanning directories in initdb and pg_basebackup
- Fix slow sorting algorithm in contrib/intarray
- Fix compile failure on Sparc V8 machines
- Silence some build warnings on OS X
- Update time zone data files to tzdata release 2015d for DST law changes in Egypt, Mongolia, and Palestine, plus historical changes in Canada and Chile. Also adopt revised zone abbreviations for the America/Adak zone (HST/HDT not HAST/HADT).
- OperaOpera 114.0 Build 5282.154
- PhotoshopAdobe Photoshop CC 2024 25.12
- OKXOKX - Buy Bitcoin or Ethereum
- Hero WarsHero Wars - Online Action Game
- Adobe AcrobatAdobe Acrobat Pro 2024.002.20854
- TradingViewTradingView - Track All Markets
- ParallelsParallels Desktop 20.1.1
- 4K Video4K Video Downloader+ 1.9.4
- CleanMyMacCleanMyMac X 4.15.8
- 4DDiG4DDiG Mac Data Recovery 5.2.2
Comments and User Reviews