Wireshark 2.6.2

What's new in this version:

Bug Fixes:
- wnpa-sec-2018-34[1]: BGP dissector large loop
- wnpa-sec-2018-35[4]: ISMP dissector crash
- wnpa-sec-2018-36[7]: Multiple dissectors could crash
- wnpa-sec-2018-37[10]: ASN.1 BER dissector crash
- wnpa-sec-2018-38[13]: MMSE dissector infinite loop
- wnpa-sec-2018-39[16]: DICOM dissector crash
- wnpa-sec-2018-40[19]: Bazaar dissector infinite loop
- wnpa-sec-2018-41[22]: HTTP2 dissector crash
- wnpa-sec-2018-42[25]: CoAP dissector crash
- ISMP.EDP "Tuples" dissected incorrectly
- Wireshark - Race issue when switching between files using Wireshark’s "Files in Set" dialog
- Sorting on "Source port" or "Destination port" column sorts alphabetically, not numerically
- Wireshark crashes when changing profiles
- Crash when starting capture while saving capture file or rescanning file after display filter change
- Crash when switching to TRANSUM enabled profile
- TCP retransmission with additional payload leads to incorrect bytes and length in stream
- Wireshark crashes with single quote string display filter
- randpkt can write packets that libwiretap can’t read
- Wireshark crashes when loading new file before previous load has finished
- Valid packet produces Malformed Packet: OpcUa
- Error received from dissect_wccp2_hash_assignment_info()
- CRC checker wrong for FPP
- Cross-build broken due to make-dissectors and make-taps
- Extraction of SMB file results in wrong size
- 6LoWPAN dissector merges fragments from different sources
- IP address to name resolution doesn’t work in TShark
- "Decode as" Modbus RTU over USB doesn’t work with 2.6.0 but with 2.4.6
- proto_tree_add_protocol_format might leak memory
- tostring for NSTime objects in lua gives wrong results
- Media type "application/octet-stream" registered for both Thread and UASIP
- Crash related to SCTP tap
- Formatting of OSI area addresses/address prefixes goes past the end of the area address/address prefix
- ICMPv6 Router Renumbering - Packet Dissector - malformed
- WiMAX HARQ MAP decoder segfaults when length is too short
- HTTP PUT request following a HEAD request is not correctly decoded
- SYNC PDU type 3 miss the last PDU length
- Reversed 128 bits service UUIDs when Bluetooth Low Energy advertisement data are dissected
- Issues with Wireshark when the user doesn’t have permission to capture
- Wrong description when LE Bluetooth Device Address type is dissected
- LE Role advertisement type (0x1c) is not dissected properly according to the Bluetooth specification
- Regression: Wireshark 2.6.0 and 2.6.1 are unable to read NetMon files which were readable by previous versions
- Wireshark doesn’t properly display (deliberately) invalid 220 responses from Postfix
- Follow TCP Stream and click reassembled content moves you to incorrect current packet
- Crash when changing profiles while loading a capture file
- Duplicate PDU during C Arrays Output Export
- DCE/RPC not dissected when "reserved for use by implementations" flag bits set
- Follow TCP Stream truncates output on missing (but ACKed) segments
- There’s no option to include column headings when printing packets or exporting packet dissections with Qt Wireshark
- Qt: SCTP Graph Dialog: Abort when doing analysis
- CMake is unable to find LUA libraries

Updated Protocol Support:
- 6LoWPAN, ASN.1 BER, Bazaar, BGP, Bluetooth, Bluetooth HCI_CMD, CIGI, Cisco ttag, CoAP, Data, DCERPC, Diameter 3GPP, DICOM, DOCSIS, FPP, GSM A GM, GTPv2, HTTP, HTTP2, IAX2, ICMPv6, IEEE 1722, IEEE 802.11, IPv4, ISMP, LISP, MMSE, MTP3, MySQL, NFS, OpcUa, PPI GPS, Q.931, RNSAP, RPCoRDMA, S1AP, SCTP, SMB, SMTP, STUN, SYNC, T.30, TCP, TRANSUM, WAP, WCCP, Wi-SUN, WiMax HARQ Map Message, and WSP

New and updated capture file support:
- Alcatel-Lucent Ascend and Microsoft Network Monitor