DriveDx is the most advanced SSD & HDD diagnostic and monitoring utility!

DriveDx for Mac

Join our mailing list

Stay up to date with latest software releases, news, software discounts, deals and more.

Subscribe
Download DriveDx 1.12.1

DriveDx for Mac

  -  27.6 MB  -  Trial
DriveDx for Mac is an advanced drive-health diagnostic and monitoring utility. Save yourself from data loss and downtime that is associated with unexpected drive failures. Don't worry about losing your important data, music, and photographs. Unlike most drive utilities, the software not only monitors the drive’s built-in S.M.A.R.T. status, but also analyzes the changes of all drive health indicators that are closely related to SSD or HDD failures (like SSD wear out / endurance, reallocated bad sectors, offline bad sectors, pending sectors, I/O errors, and more) and alerts the user immediately if anything goes wrong. Drive-health diagnostic algorithms are based on recent research in the field. The application provides access to all sufficient drive-diagnostic data to satisfy any system administrator. DriveDx is the first utility of its kind to have a real user-friendly, Mac-style interface.

When evaluating the state of various drives, DriveDx for macOS can use different (specialized) heuristic algorithms, depending on the drive model and even its firmware version. One of the key advantages of the software is that the state of HDD and SSD drives is assessed using different algorithms (the app has separate sets of rules and algorithms for HDD and SSD drives), since many state indicators of HDD drives are not applicable or make no sense in the case of an SSD drive.

Features and Highlights

Advanced Drive Health Diagnostics
Regular diagnostic tools simply check the built-in S.M.A.R.T. status of the drive, which provides the user with little information about the actual state of the physical drive. As opposed to such tools, the tool analyzes the current state of the drive using all the drive health indicators that are most likely to point to a potential drive issue (for instance, SSD wear out / write endurance, I/O errors, pending sectors, reallocated bad sectors, etc).

Drive Failing (Pre-fail) State Detection
Unlike most other tools, the app detects not only “OK/Verified” and “Failed” drive health states, but also the “Failing (Pre-fail)” drive state. Thanks to that, you will detect problems much earlier than when using any other SMART monitoring utilities. This means that you have more chances to save your critical data before any data loss actually occurs.

Real-time Drive Health Monitoring
The program runs in the background and periodically performs checks to determine the health of your SSD or HDD. When any issue or problem is found, it alerts you immediately. The app acts as an “early warning system” for pending drive problems. As a result, you have more chances to save your critical data before any data loss actually occurs.

Early Warning System
The app features a special multi-tier warning system that will inform the user about deviations from the normal state of drive attributes. It constantly monitors each S.M.A.R.T. attribute (and its change dynamics) and starts continuously warning the user as the drive degrades. On the initial stages of drive degradation, the user will receive notifications of the Warning type, then Failing (means that this drive parameter is in a pre-failure state) and only then Failed.

Drive Self-tests
The tool allows you to start and control diagnostic self-tests of SSD / HDD. The primary goal is to quickly identify if the drive is faulty. Usually self-tests consist of a collection of test routines like electrical and/or mechanical performance tests as well as the read performance test of the drive. Depending on self-test type it does read scan of a small area or the entire media.

Modern SSDs and HDDs Support
When evaluating the state of various drives, the app can use different heuristic algorithms depending on the drive model and even its firmware version. One of the key advantages of the software is that the state of HDD and SSD drives is assessed using different algorithms, since many state indicators of HDD drives are not applicable or make no sense for SSD drives.

Automatic E-mail Reports
The user can get problem notifications and drive status reports to email. Reporting can be configured on the basis of various criteria. Thanks to this feature, the user does not need to have physical access to a specific computer all the time, which is especially useful for all kinds of server rooms, data centers, etc.

A modern, good-looking and user-friendly interface
DriveDx for Mac is one of the first drive diagnostic tools created in the true Mac style. All interface elements are clear and intuitive, so it will only take you a few minutes to learn the basics and start using the program. When a problem is identified, you will see a notification on the desktop and the status bar will show the status of your drives.

Drive Free Space Monitoring
Mac OS X and applications might fail due to an inability to allocate storage space. In addition, low disk space might cause disk fragmentation. To avoid data loss and to ensure the continuous functioning of your computer it is important to monitor the amount of available storage space on your drive. Drive Dx can automatically monitor free disk space and will alert user immediately if user defined free space threshold exceeded.

Note: 10 days trial version, 2 hour session time limit.

  • DriveDx 1.12.1 Screenshots

    The images below have been resized. Click on them to view the screenshots in full size.

What's new in this version:

DriveDx 1.12.1
- Fixed: crash on old macOS's (10.9 - 10.13) when sending email report via SMTP
- Fixed: driver installer now doesn't require Rosetta 2
- Improved: drive diagnostic algorithms and heuristics
- Improved: support of Patriot P200 SSDs
- Added: minor tweaks and fixes


DriveDx 1.12.0
Added:
- native support for Apple Silicon Macs
- support of WD Blue SA510 SSDs
- support for recent models of WD Green Series SSDs
- support of Kingston DC600 SSDs
- minor tweaks and fixes

- Removed support of macOS 10.6-10.8, now minimum supported version is macOS 10.9 Mavericks
- Fixed crash on some Macs on macOS Ventura
- Improved drive diagnostic algorithms and heuristics
- Improved support of Kingston DC500 SSDs
- Improved support of SanDisk Plus SSDs


DriveDx 1.11.0
- Removed support of 32-bit Macs
- Changed now by default reports data size in units based on powers of 10 instead of 2 (ie 1K = 1000 instead of 1K = 1024), can be changed via the menu “Help > Developer”

Fixed:
- crash duriing drive long self-test on some Macs
- app menubar initially freezes in macOS 11 Big Sur
- duplicated/ghost drives in the UI if the app measurement results DB has lost its integrity (damaged)

Added:
- SAT SMART Driver fully compatible with Apple Silicon
- more user hints for different SAT driver installation troubleshooting cases
- support of Kingston A400 M.2 SSDs
- minor tweaks and fixes

Impoved:
- app UI style for macOS 11 Big Sur
- drive diagnostic algorithms and heuristics
- diagnosing NVMe SSDs in edge case scenarios
- support of Kingston A400 SATA SSDs
- descripton of next NVMe health indicators: “Power On Hours”, “Life Percentage Used”, “Data Units Written”, “Data Units Read” and “Unsafe Shutdowns”


DriveDx 1.10.1
- Fixed: DriveDx do not show external drives on Macs with an outdated version of SAT SMART driver
- Fixed: crash on Macs with Growl Notification System (http://growl.info/) installed as a standalone app/service
- Fixed: app does not reopen the previously closed main window on click on the app icon in the dock
- Added: minor tweaks and fixes


DriveDx 1.10.0
- Added : rebuilded with new Apple's hardened (secure) runtime
- Added : app is notarized by Apple with hardened (secure) runtime requirements
- Retained compatibility with macOS Snow Leopard 10.6.8 (it was not easy, it requires more and more effort, but classics worth it)
- Added drive status tooltips in the left sidebar
- Added keyboard navigation in the left sidebar
- Improved drive grouping and ordering logic (useful for Macs with 10+ connected drives)
- Improved drive diagnostic algorithms and heuristics
- Fixed "bare LF" symbols in automatic email reports
- Added support of Kingston KC600 SSDs
- Added support of SanDisk Extreme Portable SSDs
- Improved support of recent firmware versions of SanDisk PLUS SSDs
- Improved support of recent firmware versions of SanDisk X300 SSDs
- Added support of OWC Neptune 6G SSDs
- Improved support of recent firmware versions of OWC Mercury Electra 3G SSDs
- Improved support of recent firmware versions of OWC Mercury Electra 6G SSDs
- Added support of Micron 5200 MAX SSDs
- Added support of Micron 5210 ION Enterprise SSDs
- Added support of Micron 5300 MAX SSDs
- Added support of Micron 5300 PRO SSDs
- Added support of Transcend 110S NVMe SSDs
- Added support of Transcend 220S NVMe SSDs
- Added support of Transcend JetDrive 850 SSDs
- Added support of Transcend 360S SSDs
- Added support of Pioneer SL3N SSDs
- Added support of Pioneer SL2 SSDs
- Added support of Palit PSP-series SSDs
- Added support of Palit PH-series SSDs
- Added support of Apacer AS220 Panther SSDs
- Added support of Apacer AS330 Panther SSDs
- Added support of Apacer AS350 Panther SSDs
- Added support of Apacer AS510S ProII SSDs
- Improved support of recent firmware versions of Apacer AS340 SSDs
- Added support of PNY CS900 SSDs
- Added support of Patriot P200 SSDs
- Added support of Patriot Burst SSDs
- Added support of Patriot Spark SSDs
- Added support of Patriot Ignite SSDs
- Added minor tweaks and fixes


DriveDx 1.9.1
- Fixed: crash on some MacPro's with dozens connected drives
- Added: option to ignore all raw value changes of specific health indicator (no health alerts)
- Improved: support of WD Blue 3D SSDs - implemented workaround for SSD firmware bug
- Improved: support of recent editions of OWC Mercury Extreme 6G SSDs
- Improved: diagnostic algorithms and heuristics
- Added: minor tweaks and fixes


DriveDx 1.9.0
Improved:
- diagnostic algorithms are significantly updated based on feedback from thousands users
- MBR volumes/partitions detection for disk free space monitoring
- support of recent OWC Mercury Electra 3G SSD models
- support of Samsung 810 Series SSDs
- support of Samsung 830 Series SSDs
- support of Samsung SM841/PM841 Series SSDs
- support of Samsung SM851/PM851 Series SSDs
- support of Samsung SM871/PM871 Series SSDs
- support of Kingston SSD Now UV400 SSDs
- support of Kingston SSD Now UV500 SSDs
- support of SanDisk X300 SSDs
- support of LITE-ON CV1 SSDs
- support of LITE-ON CV3 SSDs
- support of LITE-ON CV5 SSDs
- recognition of SanDisk X400 SSDs
- recognition of SanDisk X100 SSDs
- recognition of SanDisk X110 SSDs
- recognition of SanDisk Z400 SSDs
- recognition of SanDisk U100 SSDs


Added:
- UI tweaks and fixes
- support of recent Apple SSD
- support of Seagate Fast SSDs
- support of Seagate BarraCuda SSDs
- support of Seagate Nytro SATA SSD
- support of Seagate IronWolf 110 SATA SSDs
- support of Kingston DC400 SSDs
- support of Kingston DC500 SSDs
- support of Kingston HyperX Fury SSDs
- support of Kingston Q500 SSDs
- support of SK hynix Enterprise PE4011 SSDs
- support of SK hynix SL308 SSDs
- support of Sk hynix SC210 SSDs
- support of Intel Pro 1500 SSDs
- support of Intel 545 Series SSDs
- support of Intel DC S3110 Series SSDs
- support of Intel S3520 Series SSDs
- support of Intel S4510/S4610/S4500/S4600 Series SSDs
- support of Dell Certified Intel S3520 Series SSDs
- support of Dell Certified Intel S4x00/D3-S4x10 Series SSDs
- support of Silicon Motion OEM SSDs
- support of Phison-based OEM SSDs
- support of SanDisk Ultra SSDs
- support of SanDisk Ultra 3D SSDs
- support of SanDisk X600 SSDs
- support of SanDisk Plus SSDs
- support of Transcend MTS430 SSDs
- support of LITE-ON CV4 SSDs
- support of LITE-ON CV8 SSDs
- support of LITE-ON IT L8T SSDs
- support of Apacer AS340 SSDs
- support of Apacer SDM5/5A/5A-M Series SSDs
- support of ADATA Premier Pro SP310 SSDs
- support of DREVO X1 SSDs
- support of DREVO X1 Pro SSDs
- support of SuperMicro SSDs
- support of Silicon Power 2280 M55 SSDs
- support of Team Group L5Lite 3D SSDs
- support of Team Group MS30 M.2 SSDs
- support of EDGE Memory eMerge 3D-V SSDs
- support of EDGE Memory diskGO Sonic SSDs
- support of EDGE Memory SE847/SE847-V SSDs
- support of EDGE Memory E3/E3-V SSDs
- support of KingSpec T60 SSDs
- support of KingSpec KSD-series SSDs
- support of Goodram CX400 SSDs
- support of Goodram Iridium SSDs
- support of Goodram Iridium Pro SSDs
- support of KingFast F6M SSDs
- support of Intenso SSDs
- support of Zheino M3 SSDs
- support of Ceroz M305 SSDs
- support of J&A LEVEN JS500 SSDs
- support of KingDian S280/S400 SSDs
- support of Ramsta S800 SSDs
- support of TC-Sunbow M3 SSDs
- support of MX-DS FUSION SSDs


DriveDx 1.8.3
Added:
- App notarized for macOS 10.15 Catalina
- Added SAT SMART Driver notarized and compatible with macOS 10.15 Catalina
- Added SAT SMART Driver installation tips for Macs with T2 security chip
- Minor tweaks and fixes

Improved:
- Diagnostic algorithms and heuristics


DriveDx 1.8.2

Fixed:
- Disk Free Space Monitoring on Bootcamp volumes

Improved:
- Disk Free Space Monitoring email reports
- Temperature monitoring for SSDs
- Detection of drives behind some RAIDs and USB/Thunderbolt multiport docks
- Diagnostic algorithms and heuristics

Added:
- Minor tweaks and fixes


DriveDx 1.8.1
- Fixed crash when sending email via some SMTP servers (like "smtp.outlook.com") and port 587 when "Use encryption (SSL/TLS)" option is off
- Added support of more detailed error messages from SMTP servers
- Improved support of "macOS Purgeable Space" for Disk Free Space Monitoring on High Sierra (10.13)
- Improved diagnostic algorithms and heuristics
- Added minor tweaks and fixes


DriveDx 1.8.0

- Support of 110 new SSD models & Improvements:
- Improved diagnostic algorithms and heuristics,
- Improved drive temperature monitoring,
- Improved description of many health indicators (S.M.A.R.T. attributes),
- Improved support of recent Apple SSDs,
- Improved support of recent OWC SSDs,
- Improved support of recent Seagate HDDs,

Added support of 110 new SSD models:
- Added support of support of Crucial MX500 SSDs,
- Added support of Crucial/Micron BX300 SSDs,
- Added support of Micron M500IT SSDs,
- Added support of Micron 5200 ECO SSDs,
- Added support of Micron 5200 PRO SSDs,
- Added support of Micron 5100 ECO/PRO/MAX SSDs,
- Improved support of Crucial MX300/MX400 SSDs,
- Added support of Samsung Portable SSD T1/T3/T5 SSDs,
- Added support of Samsung 950 Evo/Pro NVMe SSDs,
- Added support of Samsung 960 Evo/Pro NVMe SSDs,
- Added support of Samsung SM951 Series NVMe SSDs,
- Added support of Samsung PM961 Series NVMe SSDs,
- Added support of Samsung SM961 Series NVMe SSDs,
- Added support of Samsung PM961 Series OEM SSDs,
- Added support of SanDisk X400 SSDs,
- Added support of SanDisk X600 SSDs,
- Added support of Toshiba A100 SSDs,
- Added support of Toshiba/OCZ TL100 SSDs,
- Added support of Toshiba/OCZ TR200 SSDs,
- Added support of Toshiba HG6-series SSDs,
- Added support of Toshiba HG3 series SSDs,
- Added support of Toshiba HK4R SSDs,
- Added support of Toshiba Q200 EX series SSDs,
- Improved support of Toshiba Q300 SSDs,
- Added support of Toshiba HG5 and HG5 SED Series NVMe SSDs,
- Added support of Toshiba HG3 Series NVMe SSDs,
- Added support of Toshiba RD400 NVMe SSDs,
- Improved support of Toshiba HG5d Series SSD,
- Added support of Toshiba CFD MG3V series SSDs,
- Added support of Toshiba CFD MG1Q series SSDs,
- Added support of Toshiba SSDN-STH series SSDs,
- Added support of Intel 540 Series SSDs,
- Added support of Intel 3710 Series SSDs,
- Added support of Intel SSD Pro 5400s Series SSDs,
- Added support of Intel SSD 600p SSDs,
- Added support of Intel SSD 750 Series SSDs,
- Added support of Intel Optane SSD 900P Series SSDs,
- Added support of Intel Intel SSD E 6000p Series SSDs,
- Added support of Plextor M6 Series SSDs,
- Added support of Plextor M8Pe(Y) NVMe SSDs,
- Added support of Plextor M8PeGN NVMe SSDs,
- Added support of Corsair Neutron XT SSDs,
- Added support of Corsair Neutron XTi SSDs,
- Added support of Corsair Neutron SSDs,
- Added support of Corsair Force MP500 Series NVMe SSDs,
- Added support of SK hynix SL300/301 SSDs,
- Added support of SK hynix SC210/215/300/308/311/313 SSDs,
- Added support of SK hynix SH910/920 SSDs,
- Added support of SK hynix PC300 NVMe SSDs,
- Added support of WD Black NVMe SSDs,
- Added support of WD Blue PC SSDs,
- Added support of WD Blue 3D NAND SSDs,
- Added support of WD Green SSDs,
- Added support of Seagate Nytro XF1230 SSDs,
- Added support of Kingston A400 SSDs,
- Added support of Kingston SSDNow V+180 SSDs,
- Added support of Kingston SSDNow V+200 SSDs,
- Added support of Kingston SSDNow V200 SSDs,
- Added support of Kingston SSDNow UV400 SSDs,
- Added support of Kingston SSDNow UV500 SSDs,
- Added support of Kingston KC1000 NVMe SSDs,
- Added support of Transcend StoreJet 300 SSDs,
- Added support of Transcend StoreJet 500 SSDs,
- Added support of Transcend StoreJet 600 SSDs,
- Added support of Transcend ESD400 SSDs,
- Added support of Transcend SSD220 SSDs,
- Added support of Transcend SSD230 SSDs,
- Added support of Transcend PSD330 SSDs,
- Added support of Transcend MSA630 SSDs,
- Added support of Transcend MTS400 SSDs,
- Added support of Transcend MTS420 SSDs,
- Added support of Transcend MTS800 SSDs,
- Added support of Transcend JetDrive 820/825 SSDs,
- Added support of Transcend SSD360 SSDs,
- Added support of Transcend SSD420K SSDs,
- Added support of Transcend CFX500 CFast 2.0 Cards,
- Added support of Transcend CFX600 CFast 2.0 Cards,
- Added support of Transcend CFX650 CFast 2.0 Cards,
- Added support of Transcend CFX520I CFast 2.0 Cards,
- Added support of Transcend CFX700 CFast 2.0 Cards,
- Added support of Transcend CFX700I CFast 2.0 Cards,
- Added support of ADATA XPG SX7000 NVMe SSDs,
- Added support of ADATA XPG SX8000 NVMe SSDs,
- Added support of ADATA XPG SX300 SSDs,
- Added support of ADATA XPG SX900 SSDs,
- Added support of ADATA XPG SX910 SSDs,
- Added support of ADATA XPG SX930 SSDs,
- Added support of ADATA XPG SX950 SSDs,
- Added support of ADATA Ultimate SU650 SSDs,
- Added support of ADATA Ultimate SU700 SSDs,
- Added support of ADATA Ultimate SU800 SSDs,
- Added support of ADATA Ultimate SU900 SSDs,
- Added support of Lite-On Zeta SSDs,
- Added support of Lite-On MU3 ROCK SSDs,
- Added support of Lite-On CV1 SSDs,
- Added support of Lite-On CV3 SSDs,
- Added support of Lite-On CV5 SSDs,
- Added support of AMD Radeon SSDs,
- Added support of Lexar SFF-series SSDs,
- Added support of Lexar CFast 2.0 Cards,
- Added support of Smartbuy SSDs,
- Added support of RED T2/V1/V3/V5-series SSDs,
- Added minor tweaks and fixes


DriveDx 1.7.0
Improvements and tweaks:
- Fixed crash when user clicks on notification on High Sierra (10.13)
- Added support of macOS Notification Center on macOS 10.12+
- Added support of periodic email reports at a user-specified time
- Added posibilty of HDD self-test cancelation
- Improved diagnostic algorithms and heuristics
- Improved drive temperature evaluation
- Improved support of recent Apple SSDs
- Improved support of SanDisk Plus SSDs
- Improved support of recent LaCie HDDs
- Improved support of recent Seagate HDDs
- Added animation of diagnostic UI
- Added minor tweaks and fixes


DriveDx 1.6.0
- Improved compatibility with macOS High Sierra (10.13)
- Added clipboard support, user can copy (right mouse click) drive general info fields (serial number, model, size, volume names, etc)
- Added support of MacBook Pro 2016-2017, iMac 2017 SSDs
- Improved support of Apple (Toshiba-based/JMF61x) SSDs
- Improved drive temperature evaluation
- Improved support of Crucial M4 SSDs
- Added support of Micron RealSSD P300 SSDs
- Added support of Micron RealSSD P400e Enterprise SSDs
- Added support of Micron 1100 Client SSDs
- Added support of Samsung SSD 750 EVO SSDs
- Added support of Samsung PM863 SSDs
- Added support of Samsung SM863 SSDs
- Added support of Samsung PM871/a SSDs
- Added support of Samsung SM951 SSDs
- Added support of Seagate HP OEM Constellation (ES/ES.2/ES.3) HDDs
- Added support of Seagate HP OEM Enterprise Capacity 3.5 HDDs
- Added support of HP Enterprise (Intel-based) SSDs
- Added support of Kingston HyperX Predator SSDs
- Added support of Innodisk 3ME2 and 3MG2 SSDs
- Added support of Innodisk 1ME3 and 3SE SSDs
- Improved support of Intel 311/313 Series SSDs
- Improved support of Intel 520 Series SSDs
- Added minor tweaks and fixes


DriveDx 1.5.1
- Fixed crash on some MacPros with many drives
- Improved support of SandDisk Ultra II SSDs
- Added minor tweaks and fixes


DriveDx 1.5.0
- Improved diagnostic algorithms and heuristics
- Improved support of macOS Sierra
- Added updates over HTTPS
- Improved report sending via Apple Mail.app
- Tweaked free disk space reporting settings, now external drives are not included by default
- Added many stability improvements
- Added many cosmetics tweaks and fixes
- Improved support of recent Seagate HDDs
- Improved support of recent WD (Western Digital) HDDs
- Added support of Micron M510DC Enterprise SSDs
- Added support of Crucial BX200 SSDs
- Added support of Crucial MX300 SSDs
- Added support of Toshiba Q300 SSDs
- Added support of Toshiba Q300 Pro SSDs
- Added support of Toshiba VT180 SSDs
- Added support of SanDisk SSD Plus SSDs
- Added support of SanDisk Extreme PRO CFast 2.0 Memory Cards
- Added support of SanDisk Z400 SSDs
- Added support of SanDisk Ultra II SSDs
- Added support of Corsair Extreme SSDs
- Added support of Corsair Force LX SSDs
- Added support of Corsair Voyager GTX SSDs
- Added support of OCZ TRION150 SSDs
- Added support of Intel 530 Series SSDs
- Added support of Intel 535 Series SSDs
- Added support of Intel Pro 2500 SSDs
- Added support of Intel DC 3510 SSDs
- Added support of Intel DC 3610 SSDs
- Added support of VeloDrive R (PCIe) SSDs
- Added support of XceedIOPS 1F SSDs
- Added support of Kingston SSDNow KC310 SSDs
- Added support of Kingston SSDNow KC400 SSDs
- Added support of Kingston SSDNow UV300 SSDs
- Added support of Kingston HyperX Savage SSDs
- Added support of Kingston HyperX FURY SSDs
- Added support of Transcend JetDrive 420 SSDs
- Added support of Transcend MTS800 M.2 SSDs
- Added support of ADATA Premier SP550 SSDs
- Added support of ADATA XPG SX900 SSDs
- Added support of ADATA Premier Pro SP900 SSDs
- Added support of ADATA S511 SSDs
- Added support of Innodisk 3ME SSDs
- Added support of Innodisk 3IE2/3MG2/3SE2-P SSDs
- Added support of Innodisk 3IE3/3ME3 SSDs
- Added support of Mushkin Ventura Ultra USB 3.0 SSDs
- Added support of Mushkin Atom USB 3.0 SSDs
- Added support of Mushkin Chronos SSDs
- Added support of Mushkin Chronos MX SSDs
- Added support of Mushkin Chronos Deluxe SSDs
- Added support of Mushkin Chronos G2 SSDs
- Added support of Mushkin Chronos GO SSDs
- Added support of Mushkin Striker SSDs
- Added support of Mushkin Reactor SSDs
- Added support of Mushkin Triactor SSDs
- Added support of Mushkin ECO3 SSDs
- Added support of Mushkin ProSpec SSDs
- Added support of Mushkin Catalyst Cache SSDs
- Added support of SiliconMotion SM2246XT SSDs
- Added support of PNY CS1211 SSDs
- Added support of PNY CS2111 XLR8 SSDs
- Added support of PNY CS1111 SSDs
- Added support of PNY CS1311 SSDs
- Added support of PNY CS2211 XLR8 SSDs
- Added support of Wintec JM612 ExpressCards
- Added support of KingSpec SATA DOM SSDs
- Improved support of OWC Aura SSDs
- Improved support of OWC Mercury Electra 6G SSDs
- Improved support of Transcend SSD370 SSDs
- Improved support of Phison based SSDs
- Improved support of Indilinx Barefoot 3 M10 based SSDs

Join our mailing list

Stay up to date with latest software releases, news, software discounts, deals and more.

Subscribe