Traktor Pro 3.0.1

What's new in this version:

- TRAKTOR PRO 3.0.1 mainly serves to complete the support of the S4MK3 and its Haptic Drives. As version 3.0.0 already provided basic S4MK3 support, the change log of this version lists the additions achieved since then
- ADDED S4: Authentic Turntable Stop Behaviour: In TT Mode stopping a track via SHIFT + PLAY, stops it with natural inertia. For stopping it instantly, press PLAY
- ADDED S4: Haptic Cue Points: The Haptic Drive gives feedback when scrubbing over a HotCue or over the floating cue point. This feedback can be disabled in the preferences
- ADDED S4: Shift+Browse for Tree Browsing: Holding Shift + Browse completes the ability to browse all sections of the browser via the hardware
- FIXED Autogain reset when switching Mixer Mode: With this fix, manually adjusted Auto-gain values are now persistent when switching between Internal and External Mixer Mode
- FIXED Missing switch to Absolute Mode after successful DVS Calibration: After successful DVS calibration the deck now automatically switches to Absolute tracking mode
- FIXED Meters don’t work for Stem/Remix decks: The channel meters only monitored the FX Send bus of Stem and Remix Decks. They now show the full signal of the decks
- FIXED Track end warning flashing without track loaded: The track end warning used to flash when no track was loaded into the deck. Now there is no warning if no track is loaded
- FIXED S4: Skipping to HotCues results in offset in stopped TT Mode: Pressing a hot cue button on a stopped deck in TT mode will now skip precisely to the position of the hotcue marker
- FIXED S4: Switching from halted TT mode to JOG mode starts playback: Switching to JOG mode while halting the spinning platter in TT mode, will not start playback anymore
- FIXED S4: Crossfader badly calibrated in "Sharp" Mode: The crossfader is now perfectly calibrated also for “sharp” mode
- FIXED S4: Improved Manual JOG Tension Adjust: The range of manual Jog tension has been increased to two full revolutions to allow for increased fine adjustments
- FIXED S2: Auto Config broken when installing ASIO driver: The Audio Device and Output Routing settings are now properly auto configured whenever connecting the S2MK3
- FIXED S4+S2: Switch off GRID Led for Locked Tracks: The GRID button switches off whenever a track has its Beatgrid/ BPM locked